My-Symbian ~ My-Maemo ~ My-MeeGo

[AnotherGuest]

Deluxe paint IV, Bluetooth mouse and a 6120 classic equals?? The best drawing program for a Nokia phone I think. at least at 30 fps. On a 5800 xpress, you are lucky if you get 20 fps.. N95 should be something in between 20-30.

[Smell_U_Later]

On E90 inner screen and 5800 it might eat more resources due to screen resolutions...

[-claus-]

Hello
Will the display of the e71with 320 x 240 be supported. Since it's the same resolution as the Gp2x. It's just because piccodrives gives me problems with the menu and some of the games, allthough my e71 has the same resolution as my GP2x
Thanks

[AnotherGuest]

Using SDL so far, so if scummvm or opentyrian works for you, it will work fine.

[-claus-]

Thanks
Open tyrian works, the display is rotated but the controls fits with the orientation.

[AnotherGuest]

Green key, then '2' or ,'p', 'f', 's' or 3,4 should fix that. green key again

[-claus-]

Got it now, thanks

[AnotherGuest]

So if you want to test.. with lots of help from bartek.. here is a first version of UAE4ALL for S60v3.
http://www.anotherguest.se/uae4all_s60v3.sisx

And no you can't adjust the volume..

What to do?
a) Install
b) In the folder c:\data\uae4all\kickstarts or \uae4all\kickstarts you should at least place on kickstart rom file. kick13.rom, kick20.rom or kick31.rom.

Recommendation is that you run this on a 300mhz + s60v3 devices, video wise its not very well optimized, due to the SDL backend, which is more general than fast.

It is also quite memory hungry. For 64 mb devices you should select 0,5 mb chip memory and only one diskdrive. Currently the chip memory setting is not saved so that has to be fixed.

When emulating use '*' to get back to menu, use '#' to change input method between virtual keybaord, joystick, and mouse emulation.

My SDL backend has also support for different input methods, press green key and then 7 for multitap, 8 for cursor mode, 9 to emulate a joystick. Currently only SDL joystick mode is supported when emulating amiga joystick.

Also you can use a bluetooth mouse with this emulator. In order to do so, you need to install the bt mouse support package from http://koti.mbnet.fi/hinkka/Download.html, also it has a dependency on P.I.PS 1.2.0 to work properly. P.I.P.S. 1.3.0 will not work.

Touch devices are not really supported right now, 5800 is too slow, and also touch events are not really mapped to the emulated surface.

There are a couple of extra setting under misc which does n't have any effect, those are use hw scaling, and control config.

Of course not everything is not really tested at all, so there are lots of stuff to update, but its a start.

Thanks for Bartekxyz for the initiative and the very nice graphics, thanks to Notaz for optmizing and integrating Cyclone into UAE4ALL, thanks to the rest of the GP2x porting efforts and lastly but not least.. thanks to Chui for creating this awesome emulator with bits and pieces from UAE in the first place. And .. well.. can't forget UAE either.. that started it all.

[ceroberts75]

1.3.0 is the only product listed and you recomend the 1.2.0.


do you have a 1.2.0 pips that you can post here to better use your product?

[spiryt]

Thank You AG!! Absolutely fantastic!

[AnotherGuest]

Here is Pips 1.2 for S60.

[prart]

it`s a kind of magic...
AG, noticed that with scummvm too - is it possible to disable that virtual keyboard (for 5800)? from e90 big screen?
it`s a kind of magic...

[AnotherGuest]

Yeah yeah.. I know.. still you can get back area there in stead if you want! I'm working on it. Checking the presence for a touch screen should do the trick

[Rob1n]

You can download the 1.2 PIPS from http://developer.symbian.com/wiki/display/pub/P.I.P.S.

[spiryt]

IT WORKS!!!! Watching Arte right now